Firearms training: how to reduce jamming for your semi auto handgun

When you begin your firearms training, it’s likely that you’ll focus on the grip, alignment, and stance. Pretty soon, though, it becomes apparent that overcoming the common problems experienced with guns is essential. One of the most significant features, then, is to prevent bullets from jamming.

Clearing jammed bullets

Bullet jamming is one of several issues that many marksmen don’t even know about until they experience it. Even if you are familiar with the concept, you must learn how to clear the cartridge. After all, it is an issue you will inevitably face at several stages in your shooting career.

Firstly, you must check that it’s a jam and not a misfire. Following this, you’ll need to;

  • Point the gun in a safe direction,
  • Use pliers or dedicated tools to grip the cleaning rod or remove the round,
  • Rack the slide a few times to remove any jammed cartridges.

Knowing how to remove a jam is one thing, but prevention is the best form of protection for your gun and sanity.

How to prevent jamming

The bad news is that you’ll never completely remove the threat of jamming your semi auto pistol. Simple mechanical faults or wear and tear can occur from time to time. Nonetheless, several steps can be implemented to prevent jamming.

First and foremost, you need to invest in the right semi auto handgun and check that it is in good condition. Moreover, you should always keep it protected when you carry it. Whether it’s concealed or open, the right holster or bag can work wonders for maintaining the best performance.

You must also check the suitability and condition of your ammo. Corroded or damaged ammunition will be problematic while it’s also necessary to check the caliber. You must always confirm that it has been loaded correctly. As a new gun owner, this may take a little time. The speeds will increase with experience. 

Understanding your pistol is vital, and requires a responsive approach. If the gun does not recoil and create an audible bang, you may have a squib. Stop shooting and repeat the magazine loading process.

Failure to feed is another very common feature. The best way to prevent this is to clean the chamber frequently. Double feeds are another potential problem, which is why you must ensure rounds and magazines are inserted correctly.

In any of these occasions, preventing a complete jam is usually achieved by noticing unexpected performances at the earliest stage. Essentially, whether it’s a squib or a double feed, you are fixing a fault before it escalates into something worse.

What if bullet jams keep happening

If magazine rounds keep getting jammed in spite of good practices, it’s likely that you have a significant underlying issue or mechanical fault at play. While you may be capable of clearing the jam, you must not ignore the situation. Persisting with a faulty gun could put lives at risk, including your own. 

See a registered gunsmith to discover whether a repair or replacement is the best solution.

Leave a Reply

Your email address will not be published. Required fields are marked *